Invokes Graphics

Instruction Steps: Full application tutorial

Remove access vinyl and applying transfer tape

1. Prepare Decal
Gently bend the decal till able to see paper backing through the vinyl cut

2. Remove access vinyl
With a small sharp object (x-acto knife), separate the vinyl you want to remove from the paper backing

3. Prepare transfer tape
Separate the top 1/3 of the transfer tape from its paper backing, fold paper backing to allow easy access to transfer tape.

4. Apply transfer tape
Apply the exposed 1/3 of transfer top just above the paper backing of the vinyl decal and smooth out any air bubbles. Slowly apply pressure in a downwards motion while removing the remaining transfer tape paper backing to ensure any air bubbles are removed

Applying your decal to surface

1. Clean Surface
Completely clean and dry the desired surface area

2. Prepare Decal
Firmly press the grid transfer tape to the decal

3. Remove paper backing
Slowly peel off the paper backing, leaving the decal on the transfer tape

4. Apply decal
Line up your decal and place the top portion to the desired area. Slowly apply pressure in a downwards motion to ensure any air bubbles are removed

Remove transfer tape
Gently remove transfer tape to reveal your vinyl decal